The VIVO Dual Vertically Stacked Ultrawide Monitor Desk Mount review centers on a specialized solution for fitting two large screens into a vertical workspace.
Its broad screen-size range and flexible positioning stand out, while careful checks of screen weight, VESA pattern, and desk mounting space matter before buying.
VIVO STAND-V257R Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsVIVO STAND-V257R Dual Ultrawide Monitor Mount
A desk-clamped vertical mount for buyers who need to stack two large ultrawide screens and can verify their monitor and desk fit.
- Holds two ultrawide screens up to 57 inches. Maximum supported weight is 48.4 pounds for curved screens or 59.4 pounds for flat screens.
- Also lists compatibility with TVs up to 43 inches.
- Provides +55° to −35° tilt, 132° swivel on the bottom arm, and 360° swivel on the top arm.
- The bottom arm rotates up to 180° and the top arm up to 360°; height can be adjusted along the center pole.
Pros
- Supports a pair of very large ultrawide screens in a vertical layout.
- Lists substantial maximum weight capacities, with different limits for curved and flat displays.
Consider before buying
- The clamp and grommet mounting options have relatively narrow stated desk-thickness limits, so measure the installation point first.
- The 57-inch size limit alone does not establish a fit: each screen's weight, shape, and VESA pattern must also match.
Read the full review summary
The VIVO STAND-V257R is designed for two vertically stacked ultrawide monitors, with support for screens up to 57 inches and separate maximum weight limits for curved and flat displays.
Its clamp or optional grommet attachment can suit different desk layouts, and the arms provide several ways to tilt, swivel, and rotate each screen.
This combination makes it an unusual fit for a setup where side-by-side monitors would take too much width.
It is best suited to buyers who already know their monitors' dimensions, weight, and VESA hole pattern and want a mounted, stacked arrangement. The center-pole cable clips and detachable VESA plates add practical setup conveniences.
The tradeoff is that the design is specialized: desk thickness limits and monitor compatibility need to be checked against the actual workstation before committing.
The buying factors
VIVO STAND-V257R Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Large-screen compatibility
It accommodates two ultrawide displays up to 57 inches, with distinct maximum weights for curved and flat screens.
Positioning flexibility
Tilt, swivel, rotation, and center-pole height adjustment offer several ways to arrange the stacked screens.
Mounting options
A heavy-duty C-clamp and optional grommet mount give buyers two tabletop attachment approaches.
VESA range
Support for five listed VESA patterns covers more than the common 75 × 75 and 100 × 100 mm sizes.
Cable organization
Clips along the center pole help route power and AV cords, though the described cable management is focused on that pole.
Setup fit confidence
The wide compatibility range is useful, but buyers must confirm several monitor and desk measurements first.
Key Features and Specifications of VIVO STAND-V257R
- Holds two ultrawide screens up to 57 inches. Maximum supported weight is 48.4 pounds for curved screens or 59.4 pounds for flat screens.
- Also lists compatibility with TVs up to 43 inches.
- Provides +55° to −35° tilt, 132° swivel on the bottom arm, and 360° swivel on the top arm.
- The bottom arm rotates up to 180° and the top arm up to 360°; height can be adjusted along the center pole.
- Attaches with a heavy-duty C-clamp to surfaces up to 1.45 inches thick, or an optional grommet mount for surfaces up to 1.26 inches thick.
- Cable clips on the center pole help organize power and AV cords. Detachable VESA plates support 75 × 75, 100 × 100, 200 × 100, 100 × 200, and 200 × 200 mm patterns.
Pros and Cons of VIVO STAND-V257R
Pros
- Supports a pair of very large ultrawide screens in a vertical layout.
- Lists substantial maximum weight capacities, with different limits for curved and flat displays.
- Offers multiple movement adjustments and height positioning along the center pole.
- Includes clamp and optional grommet mounting approaches.
- Detachable VESA plates and pole-mounted cable clips simplify parts of setup and cable routing.
Consider before buying
- The clamp and grommet mounting options have relatively narrow stated desk-thickness limits, so measure the installation point first.
- The 57-inch size limit alone does not establish a fit: each screen's weight, shape, and VESA pattern must also match.
- A vertical stack is a focused layout; buyers wanting monitors spread horizontally should choose a mount designed for that arrangement.
Who Should Buy VIVO STAND-V257R?
Good fit
Consider the STAND-V257R if your desk is better suited to one vertical screen column than two large monitors placed side by side.
Supporting displays up to 57 inches gives it a clear role for oversized ultrawides, while the specified weight limits distinguish between curved and flat screens. Check each monitor's weight individually against the applicable maximum before ordering.
Also confirm the rear mounting pattern against the listed VESA sizes and measure the desk where the mount will attach.
The clamp option accommodates surfaces up to 1.45 inches thick, while the optional grommet mount accommodates up to 1.26 inches. The mounting location and opening, where relevant, should suit the chosen method.
The adjustment range is useful for dialing in a stacked position: the arms offer different swivel and rotation ranges, along with tilt and height adjustment.
If you value a tidier cable path, the clips on the center pole provide a simple route for power and AV cords.
Who should skip it
Skip this model if your desk cannot accommodate either mounting method within its stated thickness limit, or if your monitors exceed the relevant size, weight, or VESA limits.
Look elsewhere if you need a side-by-side arrangement, a freestanding base, or a mounting approach other than the clamp and optional grommet described here.
How the VIVO STAND-V257R Fits a Stacked Ultrawide Setup
Screen size and weight need to be checked together
The 57-inch maximum is notable, but it is only one part of compatibility.
Curved screens have a lower listed maximum weight than flat screens, so check both your display's form and its actual weight, then confirm its VESA holes match one of the supported patterns.
The vertical layout makes desk width go further
Stacking two screens places them in one column, which can be useful when wide monitors would otherwise occupy much of the desk's horizontal span.
The tradeoff is that screen height and alignment become central to the setup; use the center-pole height adjustment and arm movements to place each display where it works for your workspace.
Desk attachment is a key compatibility step
The mount uses a C-clamp or optional grommet attachment, each with its own maximum surface thickness. Measure at the intended mounting point and check for any desk features that could interfere with the chosen installation before buying.
Adjustment and cable routing support a cleaner setup
The arms have different movement ranges, including broad rotation on the top arm, while the center pole allows height adjustment.
Cable clips along that pole can guide power and AV cords, but plan the cable length and routing around the final screen positions.
Alternatives to VIVO STAND-V257R
Computer Monitor Arms alternative

2,000+ ratings
Read Amazon ReviewsVIVO STAND-V120T Dual Ultrawide Extra Tall Desk Mount
Choose the STAND-V257R if you need the listed 57-inch capacity and a vertical stack. Consider the STAND-V120T if your displays fit its 49-inch and 44-pound-per-screen limits and you prefer a dual-arm setup with its stated movement range.
- The STAND-V120T is a dual-arm mount for ultrawides up to 49 inches and 44 pounds per screen.
- It offers +85° to −25° tilt, 180° swivel, and 360° rotation, with C-clamp or optional grommet mounting.
- The STAND-V257R is made for two screens stacked vertically, supporting displays up to 57 inches with different weight limits for curved and flat screens.
Computer Monitor Arms alternative

3,000+ ratings
Read Amazon ReviewsVIVO STAND-V002L Vertical Dual Ultrawide Monitor Stand
The STAND-V002L may fit buyers who want a freestanding stacked stand and whose displays stay within its smaller size and weight limits.
For larger screens or a desk-attached mount, the STAND-V257R is the more relevant fit, assuming the desk and monitors meet its requirements.
- The STAND-V002L is a freestanding vertical stand for two ultrawides from 13 to 34 inches, with a maximum of 22 pounds per screen.
- Its base measures 15.4 × 12.4 inches, and the brackets offer tilt, swivel, and rotation.
- The STAND-V257R attaches to the desk with a clamp or optional grommet mount and is rated for ultrawides up to 57 inches.
Is VIVO STAND-V257R Worth It?
The VIVO STAND-V257R is worth considering when a vertical stack of two oversized ultrawides is the intended setup.
Its 57-inch screen limit, differentiated weight capacities, multiple adjustment options, and clamp or grommet mounting make it purpose-built for that job.
Measure before buying: confirm screen weight, VESA pattern, desk thickness, and the mounting point.
If your displays fit those limits and the stacked layout suits your work, this mount offers a strong match; if you need a freestanding or side-by-side arrangement, choose a design built for that layout.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsVIVO STAND-V257R Dual Ultrawide Monitor Mount
A desk-clamped vertical mount for buyers who need to stack two large ultrawide screens and can verify their monitor and desk fit.
- Holds two ultrawide screens up to 57 inches. Maximum supported weight is 48.4 pounds for curved screens or 59.4 pounds for flat screens.
- Also lists compatibility with TVs up to 43 inches.
- Provides +55° to −35° tilt, 132° swivel on the bottom arm, and 360° swivel on the top arm.
- The bottom arm rotates up to 180° and the top arm up to 360°; height can be adjusted along the center pole.