The SMALLRIG Universal Phone Holder Mount review is for creators who want to attach a phone to a camera or tripod and adjust orientation without changing the basic setup.
Its clamp fits phones 57–88 mm wide, while the cold shoe and threaded mounting points support a compact accessory rig.
SMALLRIG Phone Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A practical fit for creators who want a clamp-style phone mount with portrait and landscape rotation and a cold shoe for accessories.
- Adjustable clamp supports smartphones 57–88 mm wide.
- Bottom 1/4″-20 threaded hole and cold shoe provide camera or tripod mounting options.
- Phone switches between landscape and portrait orientation and locks when rotated 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.
Pros
- Broad stated phone-width range accommodates many common smartphones.
- Portrait-to-landscape rotation supports different framing needs.
Consider before buying
- The 500 g maximum calls for care when combining the phone with accessories.
- The width range may not suit a phone and bulky case together, so measure the complete setup.
Read the full review summary
The 4382 combines a width-adjustable phone clamp with a bottom 1/4″-20 thread and cold shoe, making it useful across camera and tripod setups.
It rotates between landscape and portrait, and its two rotary joints provide up to 180 degrees of adjustment for framing.
This design suits mobile photographers, vloggers, interviewers, and live-streamers who prefer a mechanically clamped phone and want to add a microphone, light, or compatible power-bank holder.
Check your phone’s width with its case on, and account for the stated 500 g maximum load when planning the mounted setup.
The buying factors
SMALLRIG Phone Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Phone fit range
The 57–88 mm width range covers many smartphones, though case thickness counts toward the fit.
Mounting flexibility
A 1/4″-20 threaded hole and a cold shoe at the bottom offer two ways to attach the holder.
Orientation adjustment
The holder switches between portrait and landscape and has two joints for angle adjustment.
Accessory expansion
A top cold shoe supports a microphone or light, and threaded holes are designed for compatible power-bank holders.
Load planning
The 500 g maximum is a useful boundary, so the phone and any attached accessories need to stay within it.
Carry weight
At 73 g, the holder adds relatively little weight to a mobile camera setup.
Key Features and Specifications of SMALLRIG Phone Mount
- Adjustable clamp supports smartphones 57–88 mm wide.
- Bottom 1/4″-20 threaded hole and cold shoe provide camera or tripod mounting options.
- Phone switches between landscape and portrait orientation and locks when rotated 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.
- Top cold shoe is designed for a microphone or light; threaded holes support compatible power-bank holders.
- The holder weighs 73 g and has a stated maximum load capacity of 500 g.
Pros and Cons of SMALLRIG Phone Mount
Pros
- Broad stated phone-width range accommodates many common smartphones.
- Portrait-to-landscape rotation supports different framing needs.
- Combines two bottom mounting interfaces with a top cold shoe.
- Low listed weight is convenient for a compact camera or tripod kit.
Consider before buying
- The 500 g maximum calls for care when combining the phone with accessories.
- The width range may not suit a phone and bulky case together, so measure the complete setup.
- The package includes the phone holder only; plan separately for the camera, tripod, phone, and any accessories.
Who Should Buy SMALLRIG Phone Mount?
Good fit
Consider the SMALLRIG Phone Mount if you regularly record with a smartphone and want one holder that can attach to either a camera or a tripod through a 1/4″-20 connection or cold shoe.
The rotating clamp can help when a project calls for both vertical and horizontal framing, while the two joints offer additional positioning options.
It is also a sensible match for a small creator rig built around a phone, microphone, or light.
Before buying, measure the phone across its width with the case installed, confirm your mounting point matches one of the holder’s interfaces, and keep the total load within 500 g.
Who should skip it
Look elsewhere if your setup depends on a phone wider than 88 mm or narrower than 57 mm, including its case. Also reconsider this holder if your planned phone-and-accessory combination exceeds its 500 g maximum.
If you need a complete filming kit, this is just the phone holder. Make sure you already have the phone and compatible camera or tripod hardware needed for your setup.
How the SMALLRIG Phone Mount Fits a Mobile Camera Rig
Clamp fit depends on the whole phone
The 57–88 mm range is a useful starting point, but the relevant measurement is the phone as mounted, including any protective case.
Measuring before purchase helps avoid choosing a clamp that is too narrow for the configuration you actually use.
Two mounting interfaces add setup options
A 1/4″-20 threaded hole and a cold shoe at the bottom accommodate different camera or tripod mounting points. Check the mounting point on your equipment before choosing a position, particularly if you plan to change between rigs.
Rotation helps with framing changes
Portrait and landscape orientation cover common social video, interview, and live-streaming formats.
The 90-degree rotation lock and two adjustable joints can make it easier to reposition the phone between shots; they do not remove the need to secure and balance the full rig.
Accessory plans should respect the load limit
The top cold shoe is intended for a microphone or light, and the threaded holes are designed for compatible power-bank holders.
Since the stated maximum load is 500 g, check the combined weight of the phone and anything attached before building out the mount.
Alternatives to SMALLRIG Phone Mount
Cell Phone Camera Mounts alternative

700+ ratings
Read Amazon ReviewsSMALLRIG Magnetic Metal Phone Mount with Cold Shoe 5156
Choose the 4382 if you want a width-based clamp and the flexibility to fit phones across its stated range.
The 5156 may suit a compatible MagSafe iPhone owner who prefers magnetic attachment and wants a detachable mounting plate; its description also cautions that external impacts may cause detachment.
- The 5156 is designed for iPhones with MagSafe functionality and uses a magnetic mounting surface.
- It has dual rotating shafts, threaded expansion holes, and a detachable top plate; its listed package also includes an Allen wrench.
- The 4382 uses an adjustable clamp for phones 57–88 mm wide, with a top cold shoe and two rotary joints.
Is SMALLRIG Phone Mount Worth It?
The SMALLRIG Universal Phone Holder Mount 4382 is worth considering for phone-based filming when you want adjustable orientation, flexible positioning, and a choice of mounting interfaces in a lightweight holder.
Its strongest fit is a compact camera or tripod setup with a phone that falls within the stated width range.
Measure the phone with its case, confirm the mounting point, and keep the complete load under 500 g.
If those checks match your rig, the 4382 offers a practical way to position a phone and add a small accessory; buyers who prefer magnetic mounting for a compatible MagSafe iPhone can compare the 5156.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A practical fit for creators who want a clamp-style phone mount with portrait and landscape rotation and a cold shoe for accessories.
- Adjustable clamp supports smartphones 57–88 mm wide.
- Bottom 1/4″-20 threaded hole and cold shoe provide camera or tripod mounting options.
- Phone switches between landscape and portrait orientation and locks when rotated 90 degrees.
- Two rotary joints provide up to 180 degrees of adjustment.