Product Reviews

SmallRig 2066B Adjustable Articulating Magic Arm Review

A compact positioning arm for camera creators mounting a lightweight monitor, light, or microphone with 1/4-inch connections.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Adjustable Articulating Magic Arm review is for camera creators who need to position a compatible monitor, light, or microphone on a rig.

Its 9.8-inch reach and dual ball heads provide flexible placement, while the listed maximum load of 213 g makes payload matching essential.

SmallRig Magic Arm Review Summary

The quick verdict

SmallRig 2066B Adjustable Articulating Magic Arm
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig 2066B Adjustable Articulating Magic Arm

A compact positioning arm for camera creators mounting a lightweight monitor, light, or microphone with 1/4-inch connections.

  • 9.8-inch articulating arm, identified as model 2066B.
  • Dual 360-degree ball heads for adjusting accessory angles.
  • 1/4-inch threaded screw at both ends for compatible camera accessories.
  • Described uses include mounting an on-camera flash, microphone, LCD monitor, or DV monitor.

Pros

  • Dual ball heads provide flexible positioning across a range of angles.
  • The 9.8-inch length can place an accessory away from its attachment point when the rig layout allows.

Consider before buying

  • The listed maximum weight recommendation of 213 g rules out many heavier monitor or light setups.
  • It is an arm only, so buyers need a compatible 1/4-inch mounting point on the rig and accessory.
Read the full review summary

The 2066B is a single 9.8-inch arm with a 1/4-inch threaded screw at each end and a 360-degree ball head at both joints.

That arrangement gives you a way to angle an accessory relative to a camera cage, rail, handle, or compatible quick release plate, provided the attachment points and accessory use the matching connection.

Its appeal is straightforward: one compact arm can help clear space around a camera and put a small accessory where it is easier to see or use.

The listed maximum weight recommendation is 213 g, so this is best suited to light accessories; check the combined weight of the accessory and any attached hardware before choosing it.

The buying factors

SmallRig Magic Arm Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Positioning flexibility

Two 360-degree ball heads allow broad angle adjustment at both ends.

7/10

Mounting compatibility

Both ends use 1/4-inch threads, a common connection for camera accessories described for this arm.

4/10

Payload suitability

The listed maximum recommendation of 213 g limits it to notably light setups.

7/10

Reach

At 9.8 inches, it offers more placement distance than a very short arm, though rig geometry still matters.

7/10

Accessory protection

An O-ring rubber cushion at the screw is intended to help prevent monitor scratches and improve the connection.

7/10

Setup simplicity

A single arm with 1/4-inch connections keeps the basic mounting arrangement simple when the rig already has compatible threads.

Key Features and Specifications of SmallRig Magic Arm

  • 9.8-inch articulating arm, identified as model 2066B.
  • Dual 360-degree ball heads for adjusting accessory angles.
  • 1/4-inch threaded screw at both ends for compatible camera accessories.
  • Described uses include mounting an on-camera flash, microphone, LCD monitor, or DV monitor.
  • An O-ring rubber cushion at the 1/4-inch screw is designed to help protect a monitor from scratches and hold the connection more securely.
  • The listed maximum weight recommendation is 213 g; the arm itself weighs 0.21 kg.

Pros and Cons of SmallRig Magic Arm

Pros

  • Dual ball heads provide flexible positioning across a range of angles.
  • The 9.8-inch length can place an accessory away from its attachment point when the rig layout allows.
  • Both ends use 1/4-inch threads, supporting a direct fit with compatible accessories and mounting points.
  • The rubber cushion is a thoughtful contact detail for a monitor connection.

Consider before buying

  • The listed maximum weight recommendation of 213 g rules out many heavier monitor or light setups.
  • It is an arm only, so buyers need a compatible 1/4-inch mounting point on the rig and accessory.
  • A 9.8-inch arm can extend an accessory away from the camera; check that the planned position and clearance suit your rig.

Who Should Buy SmallRig Magic Arm?

Good fit

Consider the 2066B if your camera setup has 1/4-inch mounting points and you want to place a lightweight monitor, microphone, or light at a different angle.

The dual ball-head design is useful when a fixed straight extension would leave the accessory poorly positioned, and the 9.8-inch length gives some room to work around a cage or handle.

Before buying, compare the arm's 213 g maximum recommendation with the complete load you plan to attach, including any small mounting hardware.

Also check both ends of the mounting chain: the accessory and the chosen point on your cage, rail, or other support need compatible 1/4-inch connections.

Who should skip it

Skip this arm if your planned accessory and attached hardware exceed 213 g, or if you need a clamp that attaches directly to a desk, tube, or other surface.

This product is described as an articulating arm with threaded ends, so confirm your rig already provides the mounting points you need.

If you need an arm primarily for a different reach or a substantially heavier load, compare those requirements against the stated length and weight recommendation before settling on this model.

SmallRig Magic Arm: Reach, Joints, and Load

Dual ball heads give flexible placement

The 360-degree ball heads at both ends let you change the angle at the accessory and mounting side.

That makes the arm useful when a monitor or microphone needs to sit off-axis, though the final position depends on the available space around the rest of the camera rig.

Measure the complete payload

The listed maximum recommendation is 213 g. Treat that as a firm selection constraint and include the accessory plus any hardware attached to it; the arm's length and adjustable joints do not increase the stated load recommendation.

Check the connection chain

Both ends have 1/4-inch threads, so compatibility depends on the mounting point and accessory accepting that connection.

The description names cages, NATO rails, side handles, and a quick release plate among possible rig components, but buyers should verify the specific attachment interface and any adapters needed for their own setup.

Use the cushion as a contact detail

An O-ring rubber cushion is fitted at the 1/4-inch screw. It is intended to help prevent scratches on a monitor and make the connection tighter, a useful design consideration when fastening an accessory with a finished surface.

Alternatives to SmallRig Magic Arm

Camera Mounts & Clamps alternative

SmallRig 2732 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 2732 9.8-Inch Magic Arm Clamp Kit

Choose the 2732 if you need the arm and a clamp in one kit for attaching to a suitable bar or surface, and want the extra 3/8-inch clamp threads.

The 2066B is the simpler choice when your rig already provides threaded mounting points and its 213 g recommendation suits your accessory.

  • The 2732 pairs a 9.8-inch arm with a super clamp that has 1/4-inch and 3/8-inch threads and opens from 15 mm to 54 mm.
  • Its arm has 1/4-inch screws at both ends.
  • The 2066B is a 9.8-inch arm with 1/4-inch threads at both ends and a listed 213 g maximum weight recommendation; it does not include a super clamp.

Camera Mounts & Clamps alternative

SmallRig 5.5-Inch Adjustable Articulating Magic Arm
4.7/5

1,000+ ratings

Read Amazon Reviews

SmallRig 5.5-Inch Adjustable Articulating Magic Arm

Consider the 5.5-inch model if a shorter arm better suits your rig and its listed higher load recommendation fits your accessory.

Choose the 2066B when you need the longer 9.8-inch reach and your setup stays within its 213 g recommendation.

  • The 5.5-inch arm also has dual 360-degree ball heads and 1/4-inch screws at both ends; its product details list a maximum weight recommendation of 1.5 kg.
  • The 2066B has a 9.8-inch reach, dual 360-degree ball heads, 1/4-inch threads at both ends, and a listed maximum recommendation of 213 g.

Is SmallRig Magic Arm Worth It?

The SmallRig 2066B is worth considering for a lightweight camera accessory that needs flexible positioning and can attach through 1/4-inch threads.

Its dual ball heads and 9.8-inch reach are useful configuration features, while the rubber cushion adds a considerate contact point for monitor mounting.

Buy only after checking the complete payload against the 213 g maximum recommendation and confirming that both ends fit your rig.

If those constraints match your setup, this is a focused way to add adjustable reach; if not, choose a mounting solution whose connection and load rating better fit the accessory.

Your review at a glance

SmallRig 2066B Adjustable Articulating Magic Arm
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig 2066B Adjustable Articulating Magic Arm

A compact positioning arm for camera creators mounting a lightweight monitor, light, or microphone with 1/4-inch connections.

  • 9.8-inch articulating arm, identified as model 2066B.
  • Dual 360-degree ball heads for adjusting accessory angles.
  • 1/4-inch threaded screw at both ends for compatible camera accessories.
  • Described uses include mounting an on-camera flash, microphone, LCD monitor, or DV monitor.

Written by

creativeindustrialobjects.com Editorial Team

Editorial team

creativeindustrialobjects.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 2066B Adjustable Articulating Magic Arm

SmallRig 2066B Adjustable Articulating Magic Arm

A compact positioning arm for camera creators mounting a lightweight monitor, light, or microphone with 1/4-inch connections.

  • 9.8-inch articulating arm, identified as model 2066B.
  • Dual 360-degree ball heads for adjusting accessory angles.
Check Video Reviews on Amazon